Chronology Current Month Current Thread Current Date
[Year List] [Month List (current year)] [Date Index] [Thread Index] [Thread Prev] [Thread Next] [Date Prev] [Date Next]

[Phys-L] Re: taking stuff apart



Dwight K. Souder wrote in part:

The second type of project is a "How does it work project", where students
pick a complex mechanical device and figure out how it works (for example:
wind-up clock, combination lock, etc.). The students then make a
presentation of their device and how it works.

1) The general idea of taking stuff apart to see how it works is
excellent. However, there are a number of devilish details.
If you don't attend to the details, it will be much less of a
learning experience.

As is all too common, it is something of a double-or-nothing
situation; the smart kids will learn a lot from the experience,
and the not-so-smart ones will learn much less. Taking stuff
apart is easy; taking stuff apart in such a way that you learn
from the experience is trickier. It helps if you already have
a pretty fair idea of how the thing is supposed to work; then
you can identify the parts as you find them.

1) Here is a suggestion that isn't as crazy as it might sound
at first: A good starting place involves taking apart a junk
computer (obsolete and/or broken). When you do this with
young kids, forget the fact that it was ever a computer and
concentrate on the fact that is is a box with a very nice
modular power supply inside. Get rid of everything but the
power supply. The result is that the kid has a closely-regulated
power supply that puts out +3.3V at a lot of amps, as well
as +5, +12, -12, and perhaps a few other things. The pinout
for the widely-used "ATX" power supply connector can be found at
http://xtronics.com/reference/atx_pinout.htm

Hint: 3.3V is great for electrolysis of water. When I was
a kid, I was stuck with 12V battery chargers and "train"
transformers, and 12V is just way too much: it causes lots
of nasty side-reactions. I would have been super-overjoyed
to have something even remotely as nice as an ATX power supply.

2) Once you have the power supply, it expands what you can
do when taking other stuff apart ... because you use the power
supply to power-up various subsystems and see what they do.
A good example of this is taking apart a junk VCR: if you
apply power to the load/unload motor, the mechanism will go
through its whole cycle, which is mind-bogglingly complex.
_______________________________________________
Phys-L mailing list
Phys-L@electron.physics.buffalo.edu
https://www.physics.buffalo.edu/mailman/listinfo/phys-l