Chronology Current Month Current Thread Current Date
[Year List] [Month List (current year)] [Date Index] [Thread Index] [Thread Prev] [Thread Next] [Date Prev] [Date Next]

Re: Truck stopping distances?



Here's some extracts from SAEs Brake performance recommended practice for
cars & trucks
CAR minimal decel values
30 mph at 18 ft/sec2 49 km/h at 5.5 m/s pedal force 15 to 100
lb 67-445 N
60 mph do 97 km/h
do 15 - 120 67-534 N
80 mph do 129
km/h do 20 - 150 89-667 N

lt truck min decel
30 mph 15 ft/sec2
60 15

truck >10,000 lb
40 10 pedal forces <200 lb
50 12

Which generally confirms comparisons of car/truck braking offered in this
thread.

Brian W


At 02:12 PM 3/1/02, you wrote:
Regarding Scott G.'s conundrum:
> ...
>I worked out that large (80,000 lb) truck has roughly 4 to 5 times the
>braking surface area as a car - discussion with several of my students who
>do repairs gave me the info. The truck needs to transfer 20 to 40 times more
>KE than a car in stopping. Graphing some data from the web yields that truck
>to car stopping distances are 1.8 on average.
>
>This does not seem to add up. It would seem like a truck must have about 10
>times the braking surface of a car to stop in 1.8 times the distance.
>
>Where am I wrong?

Scott, don't forget that an 80000 lb truck probably has a lot more
wheels, and hence a lot more brakes per vehicle than a car does. The
truck has about 4.5 times as many energy dissipating brake surfaces
as the car does. If both the truck and car have equally loaded
brakes on all their wheels this means that the truck may only need to
have its brake surfaces designed to be able to withstand about twice
the temperature jump that occurs in a car--and this is even assuming
that the truck brakes are not appropriately proportionally oversized
compared to those on a car. Also, considering the crudeness of the
scaling argument, a factor of 2 discrepancy is not all that bad.

David Bowman

Brian Whatcott
Altus OK Eureka!